Get More Info

Wildlife Metal Art Driveway Gates – Page 2

Custom Wildlife Metal Art Driveway Gates – Page 2

16W.

 

Illinois 20′ Wildlife Driveway Gates – Corten Steel

Illinois artist metal entry gates with deer and fox silhouettes plasma cut by JDR Metal Art.

This 20′ dual swing deer gate was designed to rust to a fine purple patina. Mounted to local stone columns, it is made from Corten weathering steel and will develop a beautiful rust patina over time until eventually the rust achieves its final look; a slightly purple-hued rustic finish that seals itself off from further rusting.

We installed these dual swing gates at a private hunting reserve in Cuba, Illinois.

For openers to install Apollo model 3500/3600 driveway gate openers along with an automatic exit wand and a wireless intercom/keypad system. The weather was uncooperative with lots of rain, high wind, and then snow but we survived and this picture was taken and sent to us the next spring by Jeff Martin, landscape architect for this project which now features native prairie grass and wildflowers along each side of the driveway.


17W.

 

Missouri – 14′ Dual Swing Bear & Deer – Steel

Driveway Gate Bear Deer Bear Paw Ranch Missouri plasma cut by JDR Metal Art

The bear depicted on these plasma cut ranch gates happens to be “Gentle Ben” of TV fame in the 1960’s…now memorialized in steel making up the driveway gate at Bear Paw Ranch in St. James, Missouri where Gentle Ben was born and raised. The gate was custom designed and fabricated for the gentleman who now owns the ranch. Our client’s son’s wedding was coming up soon and the project was time critical. We were able to get the gate delivered to him to be installed with a couple days to spare before the wedding. A whitetail deer is featured on the other half of the gate. A truly one-of-a-kind design with all design rights privately held by gate owner.


18W.

 

New York – 16′ Dual Swing – Steel

This 16′ bear-themed entry gate was built for a fun couple who spend their time between Florida and their family farm, the Mountain View Estate, in the beautiful Adirondacks in upstate New York. We had the gates powder coated with zinc rich primer for corrosion control with  a flat bronze topcoat. We delivered the gates from Columbus, Ohio to New York and installed them there along with an Estate Swing 1000D automatic opener package.New York Custom Driveway Gates with plasma cut wildlife bear scene by JDR Metal Art.


19W.

 

Tennessee 16′ Dual Swing Elk & Mountains – Steel

An artistic driveway gate for private mountain residence along the Appalachian Trail.


20W.

 

Ohio Deer, Rabbit & Squirrel- 16′ Dual Swing  – Steel

A detailed driveway gate with custom lettering, whitetail deer, pheasant, pine trees, flying birds, squirrels, rabbits, day lilies and an English Springer Spaniel. Total width including the side panels is 24′.

Deer Pheasant Driveway Gate Wildlife

21W.

Washington Deer Themed Driveway Gates

12′ dual wing gates with oak tree gate design and deer family.

Metal gates with tree for Washington home.
Tree/Deer Theme – Washington State

22W.

Bison Themed Driveway Gate

Bison gate theme with tree, grass and mountains for Alabama bison farm.

Bison themed driveway gate with silhouette of bison under a tree. Plasma cut bison made from steel with arched top on swinging gate for Alabama bison farm.


23W.

Driveway Gates with Decorative Side Panels

14′ dual swing steel gates with whitetail buck & bird on left panel, stream on right panel, bird dog and pheasant.

Decorative driveway gates with deer, dog and pheasant theme plasma cut for Marion Ohio drive entry.Haven’t Seen Anything That Hits Home Yet?

No worries, we will create exactly the gate you’re looking for with a totally personalized custom driveway gate design!

 If you have a theme in mind we can design a gate that will be meet or exceed all your expectations. If you are able to provide us with a picture of your entrance then we can actually show you what the gate will look like before the first cut is ever made.

You can also check out our ornamental  tree gates here & horse gates here. If you are interested in having us create a custom design for you or have any other questions then feel free to contact us below.

Thank you for taking the time to look at some of the unique driveway gates we’ve enjoyed putting together here at JDR Metal Art.

Most customers typically choose steel construction for their gate. We also build them from aluminum whenever the situation calls for it. Whether steel or aluminum best meets your needs, they can be made to custom fit your driveway no matter the size.

Ready to get your gate project going? Start off with a FREE Quote!

4 Reasons Why Your Home Needs Driveway Gates