Free Consultations M-F 8am-7pm EST

Skip to content

plasma cut driveway gates

Ranch brand on driveway gate.

Washington Metal Art Driveway Gates – Custom Horse Ranch Theme

Washington Custom Driveway Gates

Horse Themed Plasma Cut Gates

Here’s a metal art driveway gate project currently being built and then shipped to Washington state.

The metal artwork was cut on my newly built plasma cutting machine. The plasma table has been up and running reliably for about a month now and maintains accuracy to the width of a hair, or about three thousandths of an inch.

Plasma cutting a driveway gate with a Hypertherm Powermax 45XP.

 

Here is a plasma cutter that is cutting a metal sheet.Silhouette horse design for driveway gates in Washington state. This custom ranch brand is on a Washington custom driveway gate. Here are two plasma cut horses on a metal driveway gate. This is a custom metal art gate frame with mig welds. Horse themed driveway entrance gate. Ranch brand on driveway gate. Driveway gate with horse design.

Contact Form – Let Us Give You a Quote Today!

Driveway Gates for Orlando FL Wildlife Preserve

Orlando Florida Aluminum Driveway Gates

Plasma Cut Metal Art with Deer, Antelope & Turkey Design

Here is an aluminum wildlife driveway gate JDR Metal Art is plasma cutting for the Cypress Ridge Hunting Preserve near Orlando, Florida.

Featuring a whitetail deer, antelope and turkeys, we are building three of these single swing aluminum gates for our client.

With a nationwide client base, we specialize purely in the design, fabrication and powder coating of custom driveway gates.

Metal art driveway gates we plasma cut from marine grade aluminum for Orlando Florida residence.

Aluminum Drive Gates

Built from extremely corrosion resistant nautical grade aluminum sheet, this is a huge single swing gate with the “canvas” measuring approximately 16′ wide by 8′ tall. Aluminum sheets this size are quite difficult to find. Typically they are used in the ship construction industry and for military grade armor plating applications. After much searching we were finally able to source three of these sheets and have them hauled from an aluminum mill in Maine to our custom gate facility in Ohio. From there we will be hauling the finished gates directly to our customer in Orlando. The gates will be offloaded there and the installation will be handled by a local installer who will be installing electric gate openers sufficient to handle these massive gates. Luckily, aluminum is much lighter than steel which means the forces of gravity and wind will be exerting less force on the gates and requiring less force to be exerted by the openers to open and close the gates.

Ornamental driveway gates fabricated from aluminum for Orlando Florida entrance.

Animal Art for Entry Gate

This is a plasma cut silhoutte of an antelope on a driveway gate.

Here is a picture of a deer silhouette on a plasma cut entry gate.

This is a plasma cut aluminum deer silhuoette.

Gate lettering for Cypress Ridge Hunting Preserve in Florida.

Custom aluminum plasma cut gate and sign lettering.

Drive gates with deer, antelope, turkeys, trees, etc.

If you need a custom drive gate we are ready to get started on it for you today!

Driveway Gates Washington | Custom Plasma Cut Bear & Moose Design

Custom Ornamental Driveway Gates Shipped to Washington

Plasma Cut Driveway Gates

We worked with a client from the state of Washington to design these ornamental driveway gates. The design theme features a bear and a moose in a background that reflects the client’s locale.

Ornamental driveway gates in front of Washington home. Bear and moose silhouettes plasma cut by JDR Metal Art.

If you look closely you can see that the gates are hung from steel posts placed directly behind a magnificent overhead entryway that features bears carved from wood!

Driveway Gates Built to Last

Each driveway gate panel is 11′ wide for a total gate width of 22′. The panels weigh approximately 325 lbs. per side. We used heavy wall 7 ga. tubing for the frames so there is plenty of structural support to easily withstand winds and the forces of being repeatedly opened and closed by automated gate openers. The driveway gate silhouettes are cut from 11ga. sheet. The gates and posts were pretreated and then powder coated black multiple times to build a nice thick rust preventing barrier between the steel and the Washington environment.

Artistic Driveway Gates, Competitively Priced

At JDR Metal Art driveway gates, not only do we build our driveway gates to last, we design and build them in a way that allows us to provide a beautiful artistic driveway gate at or lower than the cost of our competitors who simply provide plain looking gates mass produced in either Mexico or China. Why settle for less from them when you can get more from us? We are proud to provide our customers with metal art gates handcrafted in the USA!

Customized Designs for Driveway Gates

We enjoy working with people from all walks of life in order to help them create a gate that will make a lasting statement about who they are and what they stand for. It is an honor and a privilege to be given such an opportunity on an everyday basis. It is a challenge that we don’t take lightly. We are receptive to the many factors that go into bringing out the full design potential in each customer’s driveway gate design process.

Nationwide Shipping, Lowest Rates

We ship most of our custom made driveway gates via motor freight. They are crated up and shipped from our fabrication and powder coating facility in Columbus, Ohio to the final destination. The gates can be shipped directly to your residence, to a local business, or picked up from a local freight terminal.

Contact Us Today For A FREE Gate Quote: