Missouri Driveway Gates | Artistic Oak Tree & Horse Metal Art

Missouri Driveway Gate

Metal Art Oak Tree Gate with Horse Cutouts Delivered to Missouri

Missouri oak tree drive entrance gate featuring horses by JDR Metal Art

We completed this JDR Metal Art Missouri driveway gate in the summer of 2014.

It is a plasma cut driveway gate we custom designed, built and delivered from our gate shop in Columbus, Ohio to Missouri. It is 15′ long and approximately 8′ tall in the center. Our clients graciously sent us the picture after we installed the gate and their brick columns and concrete driveway were later completed, complementing their new 16′ single swing oak tree gate.

Another picture immediately after fabrication & powder coating…

Missouri driveway gate with plasma cut tree and horse design made into metal art.

This was the longest single piece gate we had built up to that time (until the next Missouri driveway gate we designed and built). Usually we end up splitting the gate into two pieces. This was a setup where fabricating a large single swing gate did not present an issue. We used all 1/8″ thick steel wall tubing for the framework. The oak tree silhouette itself was plasma cut by hand out of a 3/16″ thick sheet of steel. The two metal art horses which accent the tree are also plasma cut from 3/16″ sheet metal. After we put the oak tree leaves on the gate we then sandblasted everything, pretreated it and baked on two coats of “Super Durable” exterior grade black powder coat.

Plasma Cut Tree Headboard

For these particular clients we also built a custom metal art headboard to match a Cali-King size bed frame. It was powder coated with a special order grey metallic flake finish.

Headboard featuring plasma cut metal art tree design

 

 Close-up After Powder Coating:

Grey metallic powder flake on metal art headboard.

Be sure to check out some of our other custom tree themed driveway entry gates. We build many other designs also. You can have us custom design a project specific to your needs. Feel free to contact us with any questions, we would love to help.

Thanks for reading another post on our JDR Metal Art Blog!

Contact JDR Metal Art to learn more:

Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.

West Virginia Driveway Gates | Custom Plasma Cut Deer & Turkey Scene

West Virginia Driveway Gates

Recently at JDR Metal Art we built this handmade West Virginia driveway gate with some design help from our clients. They gave us some photos of a turkey tom and hens, as well as a whitetail doe, which we added into modified version of our standard silhouette style deer driveway gate.

West Virginia driveway gates dual swing deer turkey plasma cut by JDR Metal Art.

Being a dual swing gate, each panel is 7′ wide and weighs about 200 lbs. We used 1/8″ thick steel for the gate material. We supplied heavy duty 4×4 steel posts with 1/4″ thick walls, as well as J-bolt hinges rated for 600 lbs per side. We powder coated everything with a black super durable polyester finish. The clients then came and picked up the finished product. They hung the gates themselves and had a professional gate opener installer wrap up the project with automated openers.

Artistic farm gate in West Virginia featuring deer and turkey silhouettes plasma cut by JDR Metal Art.

Custom Iron Driveway Gate Designs

We offer many varieties of custom gates to folks in West Virginia (and everywhere else). Using our custom gate design process makes it easy for you to have a personalized driveway gate of your own. There is no design fee if you choose an existing design. We offer designs for everything from deer and wildlife to horses and trees. All our gates add security, beauty, and otherwise increase the value of your property. Contact us today to get started on your own security gate!

To contact JDR Metal Art:

Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.

Custom Wildlife Driveway Gates with Metal Art Deer Scene

Driveway Gates with Wildlife Themes

Metal Art Deer Scene

30′ Automatic Sliding Gate

Shipped to Missouri on 53′ Flatbed

This driveway gate was custom designed for a drive entrance located in Missouri.

The steel wildlife scene is 18′ long and depicts two buck deer, a doe and two fawns on a woodland background. We worked with our clients through their contractor to come up with the gate design.

We also incorporated the street address and family name at the bottom of the gate.

The remaining 12′ of the gate is a frame which will be attached to the automated slide gate opener system.

Missouri wildlife driveway gates featuring deer silhouette plasma cut by JDR Metal Art.

The driveway gate silhouette was both drawn and cut entirely by hand with the help of a plasma cutter.

We used a 3/16″ thick plate of steel for the canvas and 2.5″ square tubing for the frame. The top is arched to accommodate the tree line.

We applied Picklex as a metal  pretreatment in order to eliminate surface oxides and condition the metal for maximum bonding and rust protection.

We then sprayed two coats of industrial rust preventive primer (red oxide) followed by two coats of glossy black rust inhibiting finish paint.

Custom Driveway Entry Gate Themes

Here are some of our other wildlife style entrance gates. You can also check out our tree themed gates and our horse themed gates. Feel free to contact us below to discuss the project you have in mind. We design, build, powder coat and ship all of our gates from Columbus, Ohio to Missouri or just about anywhere else people want them. We consistently offer the best value anywhere for custom wildlife themed driveway gates!

To contact JDR Metal Art:

Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.