Driveway Gates – 30 Different Tree Designs!
JDR Metal Art Has More Tree Gate Designs Than You Can Shake A Stick At!
Oaks, Maples, Willows, Cypress, Palms & More!
JDR Metal Art makes driveway gates for clients across the US. We work with landscapers, nurseries and homeowners, to name a few.
Below are just a handful of the custom tree themed driveway gates we’ve created for our nationwide clients over the years.
They’ve all been built to custom specs, no two are quite the same.
Get A Brand New Custom Gate Design
Gates Ship FREE Nationwide – Spring 2021!
29 Driveway Gate Designs with Trees:
1.
24′ Dual Swing Oak Tree Driveway Gate
Steel Cattle Farm Entrance Gate
A 24′ dual swing entrance gate for a southern Ohio farm. It also features metal art livestock silhouettes and scenery incorporated into the background.
2.
Columbus, Ohio 14′ Dual Swing Steel
We custom built the gates in Columbus, Ohio to fit the existing stone columns. The gate panels hang 12″ above the driveway for snow clearance and are 9′ tall in the center.
3.
Indiana Oak Tree Driveway Gates
18′ Dual Swing
Custom plasma cut oak tree driveway entry gates, 8′ tall in center. Hung from 4×4″ steel square tubing F-posts buried within rock columns.
4.
Florida Oak Tree & Wildlife Gate
20′ Dual Swing Aluminum
Aluminum driveway gates with plasma cut oak tree & oak tree leaves. Also plasma cut wildlife including deer, fawns, squirrel, turkeys & rabbit. Powder coated with custom bronze finish. Gate installed with Viking underground gate opener system.
5.
Atlanta, Georgia Tree Gates
18′ Dual Swing Steel
Steel tree gates with mare and foal horse theme built by JDR Metal Art for Atlanta, Georgia estate entrance. Dual swing gate, each panel is 9′ wide.
6.
Texas Ranch Driveway Gates
Plasma Cut 18′ Dual Swing
These Texas ranch driveway gates feature a two-tone powder coated finish. We also added horses and a silhouette of our client’s dog to create a plasma cut scene.
7.
Michigan Maple Tree Gate Design
14′ Dual Swing
This maple tree gate design is plasma cut from rugged 3/16″ thick sheet steel and stands approximately 7’6″ tall in the center of the opening.
8.
Kentucky Driveway Gate
“Tree of Life” 12′ Single Swing
This project was done in collaboration with the fine people at Overhead Door of Lexington, KY. Their client presented us a gate design idea and we turned it into reality for them.
9.
Florida Keys Palm Tree Gates
16′ Dual Swing
10.
Charleston, SC Driveway Gates –
14′ Dual Swing
This dual swing iron gate is mounted to steel posts and brick columns with automated electric gate openers attached. Located in front of a beautiful Charleston, SC residence.
11.
Missouri Driveway Gate featuring Horse & Tree Design
15′ Single Swing
We designed, built and delivered this 16′ single swing gate to Missouri. The tree is plasma cut from 3/16″ steel sheet and bolted to the square tubing frame of the gate. The two horse silhouettes were also plasma cut and then welded onto the pickets of the gate. Everything was powder coated black.
12.
Smoky Mountain Oak Tree & Wildlife Design
18′ Dual Swing
Custom designed for client in Smoky Mountains, early 2018. Split swing oak tree featuring a buck, doe, two baby fawns, two rabbits, a squirrel and a ground hog.
13.
Washington State Tree & Wildlife Themed Entry Gate
12′ Dual Swing
This is a 12′ dual swing steel with an oak tree silhouette theme, 7′ tall, stamped pin oak leaves welded into place, personalized lettering and wildlife cutouts. Powder coated black.
14.
Louisville, Kentucky Oak Tree Gate
18′ Dual Swing
Project for Louisville, Kentucky residence.
15.
Chattanooga TN Curly Tree Driveway Gates
14′ Single Swing
These Chattanooga, TN driveway gates were a really cool project we did for some fantastic folks up on Signal Mountain at the “Wicked Ranch”. The side boxes are lit from the inside at night and it’s quite an impressive scene. The gate opener system is powered by a solar panel.
Another picture of the Chattanooga TN entry gate, this time in the shop.
16.
Wisconsin Oak Tree Driveway Gates
Dual swing 16′ entry gate with oak tree theme built for a landscaping contractor’s residence located in the central Wisconsin area. Approximately 8′ tall in the center. Our standard black powder coat finish over zinc rich primer.
17.
12′ Wisconsin Gate
Another Wisconsin decorative entrance gate. 12′ wide dual swing steel gate which is approximately 7′ tall center. Powder coated bronze finish with clear coat on top.
18.
Lake Geneva, WI 20′ Oak Tree Gate
This impressive dual swing gate is 8′ tall in the middle and was delivered to Lake Geneva, Wisconsin by JDR Metal Art and installed by the customer.
Handcrafted entirely from heavy duty 3/16″ steel materials, these gates will withstand the tests of time.
19.
12′ Single Swing St. Louis, Missouri Entry Gate
This is a single swing variation of our oak tree entry gate built and delivered for a St. Louis, Missouri area residence.
20.
North Carolina Oak Tree Driveway Gate
12′ Single Swing Metal Art Tree, Cattails & Wildlife Silhouettes
12′ single swing gate with plasma cut metal art oak tree, cattails & wildlife theme with customized lettering.
21.
Sacramento, CA Rustic Driveway Gate
18′ Dual Swing with Complementary Horses
Client north of Sacramento decided to go sans our super durable powder coat finish and instead let his gates rust naturally..nowadays being commonly referred to as “rustic chic”. It’s a dual swing steel gate with pickets. There is a decorative oak tree on the front with plasma cut horses beneath.
The pickets are 1″ square tubing, the frame 2″ square tubing, the tree is plasma cut from steel 3/16″ sheet and the oak tree leaves are stamped from 16ga steel; each one is carefully hand placed and permanently welded in place.
Shown below with natural California rustic finish.
22.
Louisiana Entry Gates
These Louisiana entry gates were built for a lady with smaller dogs. We put the pickets closer together on this one so the dogs wouldn’t be able to get out. Not one of our tallest tree gates, this one is around 6’6″ tall.
23.
20′ Dual Swing Driveway Gate
Coon Hunter Driveway Gate
Decorative driveway gates built for avid coon hunter from West Virginia and installed by JDR Metal Art at client’s Missouri property. Features the decorative tree, raccoons and deer also, as well as the client’s farm name.
The tree is a whopping 8′ tall at the top and has an arched frame behind it. Design is plasma cut from 3/16″ sheet.
24.
Pennsylvania Tree Gate
16′ Single Swing
Custom Tree driveway gate theme for Erie, Pennsylvania / Lake Chataqua, NY area property. 16′ wide single swing is 8′ tall at the center. This huge gate is powered by an LA 500 gate opener to manage opening and closing with the high winds coming off Lake Erie.
25.
Kentucky – Aluminum Curly Tree Gate
14′ Dual Swing
Louisville, Kentucky aluminum gates, dual swing.
The decorative metal art tree is plasma cut from 3/16″ aluminum sheet for extreme durability. 2″ aluminum square tubing outer gate frame. 1″ square tubing pickets. The gates have maintenance-free roller bearing hinges provide very smooth, resistance-free, long-term swinging that makes it easy for the gate openers. The aluminum is very lightweight which further eases the burden on the electric openers, thereby increasing the lifespan of the opener system.
These decorative aluminum gates were sandblasted and given an eco-friendly “transition metal coating” pretreatment before applying two coats of our “Super Durable” exterior grade powder coat finish.
26.
8′ Wide Pedestrian/Walkway Gate
27.
California Palm Tree Driveway Gates
Palm tree gate design features a stallion and a mare for front entryway to southern California mansion.
28.
Willow Tree Gate Design
29.
Indianapolis 14′ Tree with Decorative Side Panels
30.
Minnesota Oak Tree Driveway Gate Design
This beautiful oak tree driveway gate is flanked by two massive stone columns and safeguards a log home located on an exceptional walleye fishing lake north of Minneapolis, Minnesota. Doubled pickets across the bottom.
Decorative Driveway Gate Designs
We have created many hundreds of decorative gate designs for our clients over the years. We design and build whatever gate design our customer desires and guarantee they will be 100% satisfied with the end result.
Below are several design possibilities for other tree-related gate design themes. Do you have an idea that you’d like to see turned into a design for your new custom gate?
Decorative Driveway Gate Automation
Few people wish to get in and out of their car or truck numerous times a day just to open and close their driveway gate, even on a warm, sunny day…but especially on mother nature’s more unpleasant days.
Our decorative driveway gates will work with practically all automatic gate openers. We install many different gate opener configurations and are familiar with all the best brands out there such as Liftmaster, Apollo, Door King, Viking, etc.
Whether you have 110v or low voltage (12 or 24v) power available at the gate site or are half a mile from power and need to use a 12v or 24v solar system, we can help you understand your better options to power them to create the most reliable gate operator system.
Are You Interested In a Personalized Driveway Gate Design? We’d Love to Hear From You!
We can design a custom tree gate for you using our simple and easy gate design process.
Once the gate design is finished to exceed your expectations then we are able to move forward with the custom fabrication work.
Inquiry Form: