Virginia Driveway Gate | 16′ Single Swing Artistic Tree Design

Virginia Driveway Gate

16′ Single Swing Tree Design

This artsy tree themed driveway gate was built for a Virginia estate entrance. It totals 16′ wide by 8′ tall and weighs 350 lbs.

Welding on plasma cut tree silhouette to driveway gate.

Metal Prep: The Foundation of an Exceptional Gate Finish

Sandblasting prepares the steel for the powder coat finish by removing rust, mill scale and other soils from the surface. Here the plasma cut tree is getting cleaned up with a large supply of compressed air and silica sand.

Driveway gate being sandblasted free of rust and mill scale.

Artistic driveway gate with curly tree design.

driveway-gate-curly-tree-design-rusty-by-jdr-metal-art

Sandblasted steel on a plasma cut driveway gate.

Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.

 

Kansas City Equine Themed Ranch Driveway Gates by JDR Metal Art

Silhouette Driveway Gates for Whispering Horse Ranch in Kansas City, MO

Driveway gate with horse design.

Here we have a set of horse themed Kansas City driveway gates which was designed for a 14′ entrance and custom built by JDR Metal Art. This project was turned around in about 2 weeks from the time of deposit until we shipped it from our Columbus, Ohio facility.

Custom Made in the USA

We used all US made steel for the frame and silhouettes with 1/8″ thick steel sheet for the horse and fence silhouettes. The gate frames are mixture of square tubing in 1/8″-1/4″ wall thickness (the thicker tubing being for the hinge side of the gate frames). The entry gate posts are 4″ square tubing steel with 1/4″ wall thickness and the hinge sockets are welded to them and include grease fittings and stainless steel ball bearings for a super-smooth swing.The arches were bent with a hand roller and the gate silhouettes were cut by hand with a plasma cutter.

Powder Coated Tough

The gates and posts were pretreated with an eco-friendly rust preventive and bonding promoter (Picklex) and then electrostatically coated with two passes of 60% gloss black super durable grade powder coat baked to a finish at 400 degrees in our in-house powder coat oven. Then we packed them up on a crate with plenty of foam and cardboard to protect the beautiful powder coat finish during transit to their final destination at a Kansas City residence.

Horse Themed Gates:

Entry gate with metal art horses. Drive gate featuring metal horse silhouettes. Metal art dual swing driveway gate with equine theme.

Get a Custom Designed Entrance Gate by JDR Metal Art

We can design a new gate for your driveway entrance. Our gate design process is very reasonably priced. Let us know when you’re ready to get started on your new driveway gate with a theme designed especially for you by JDR Metal Art!

To contact JDR Metal Art:

Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.