Oklahoma City driveway gates featuring life-size horse and dog plasma cut silhouettes built at JDR Metal Art.
We are currently working on this driveway gate project for a ranch entrance located on the outskirts of Oklahoma City. There will be one of these 15′ wide x 7’4″ tall single swing gates at two separate entrances. Each gate will feature three paint horses and our clients’ five family dogs.
Using our custom gate design process, we were able to take the design from start to finish in a couple week’s time. First, we worked with our customers over the phone and through email to coordinate the necessary dimensions and details for the custom driveway gate design. Then we put together the design theme they had in mind.
We lay the designs out by hand and then use a hyperthem plasma cutter to create these gate silhouettes. Since there are two gates with the same design and we are doing them by hand (not with a CNC machine) each one will be slightly different but this makes them unique as well!
One of the five plasma cut dog silhouettes after we sprayed the steel gate with a bit of driveway cleaner to accelerate the rusting process…
Silhouette Driveway Gates for Whispering Horse Ranch in Kansas City, MO
Here we have a set of horse themed Kansas City driveway gates which was designed for a 14′ entrance and custom built by JDR Metal Art. This project was turned around in about 2 weeks from the time of deposit until we shipped it from our Columbus, Ohio facility.
Custom Made in the USA
We used all US made steel for the frame and silhouettes with 1/8″ thick steel sheet for the horse and fence silhouettes. The gate frames are mixture of square tubing in 1/8″-1/4″ wall thickness (the thicker tubing being for the hinge side of the gate frames). The entry gate posts are 4″ square tubing steel with 1/4″ wall thickness and the hinge sockets are welded to them and include grease fittings and stainless steel ball bearings for a super-smooth swing.The arches were bent with a hand roller and the gate silhouettes were cut by hand with a plasma cutter.
Powder Coated Tough
The gates and posts were pretreated with an eco-friendly rust preventive and bonding promoter (Picklex) and then electrostatically coated with two passes of 60% gloss black super durable grade powder coat baked to a finish at 400 degrees in our in-house powder coat oven. Then we packed them up on a crate with plenty of foam and cardboard to protect the beautiful powder coat finish during transit to their final destination at a Kansas City residence.
Horse Themed Gates:
Get a Custom Designed Entrance Gate by JDR Metal Art
We can design a new gate for your driveway entrance. Our gate design process is very reasonably priced. Let us know when you’re ready to get started on your new driveway gate with a theme designed especially for you by JDR Metal Art!