Colorado Ranch Driveway Gates – 16′ Horse Theme by JDR Metal Art

Colorado Custom Ranch Gates

“Big Hollow Ranch” Horse & Mountain Design Theme

16′ Wide x 6’4″ Tall Dual Swing

We designed, built, powder coated and shipped these custom ranch gates to our client in Colorado.

Gate opener brackets pre-welded for client

Our customer installed the Apollo gate openers himself. To make his job much easier we also mounted the gate opener brackets for his gate openers so that everything is ready for him to bolt together onsite.

Gate opener brackets mounted on gate post for Apollo gate openers.

Sandblasted Prior to Powder Coating

We sandblast our gates clean for ultimate adhesion and bonding of the powder coat to the metal surface.

Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.

Dallas Ft. Worth Gates | Deer Theme by JDR Metal Art

Dallas Ft. Worth Custom Gates -Plasma Cut Deer & Mountain Theme by JDR Metal Art

If you have a ranch in Texas, it’s a given that you’re probably gonna want a ranch gate that keeps people out and livestock in.

You might as well make it look good, while you’re at it!

Here’s an example of one of several we’ve created for clients in the DFW area of Texas over the past decade.

Driveway gates custom made by JDR Metal Art for Dallas Ft. Worth area residence.

JDR Metal Art designed, plasma cut and powder coated these dual swing gates for a client in the Dallas-Ft.Worth, Texas area.

This wildlife scene illustration features mountains in the background and deer and turkeys among the trees and grass in the foreground.

Rugged Material = Rugged Driveway Gates

These gates were made to be extremely durable and long-lasting. We used all 3/16″ wall 2×2 square tubing for the gate frame. The silhouettes were hand cut from 3/16″ sheet metal. We also applied one layer of zinc rich powder coat primer and two topcoats of black exterior grade powder coat. Each gate panel weighs approximately 300 lbs!

DFW Ranch Gate with Horse Theme by JDR Metal Art 2020

Ranch gates before sandblast and powder coat.
Gate panels prior to sandblasting. All oxides (rust & mill scale), oils and soils must be removed prior to the pre-primer and powder coat. The gate opener bracket has already been welded in place on the bottom rail of the gate.


Plasma Cut Horse Metal Art for Ranch Gates

Plasma cut metal art silhoueuttes made from 1/8″ sheet metal for a high-strength canvas. The sheet is stitch welded to the frame.

Adjustable, friction-less and maintenance-free hinges are supplied with each ranch gate panel we build.



Ex.: Wildlife, Pets, Equine, Trees, Farm, Ranch, Residential, Simple, Traditional, etc.