Tree of Life | Plasma Cut Driveway Gate

Tree of Life | Plasma Cut Driveway Gate

Metal driveway gate by JDR Metal Art installed in Lexington, Kentucky.
Metal driveway gate by JDR Metal Art installed in Lexington, Kentucky.

Custom 12′ Single Swing Gate Design for Lexington, KY Client

This gate concept was submitted by a client in Lexington, KY.

Installed by Overhead Door Company of Lexington.

Driveway gate design with tree of life for Lexington, KY.

Plasma Cutting the Silhouette from 1/4″ Plate Steel

Bringing the metal tree concept to life begins with the plasma putting operation. The artwork for the tree silhouette is loaded into the plasma machine and cut out.

Plasma cutting program with tree of life design. shown on the screen.

Plasma cutting the metal art tree of life from steel plate.

Plasma cutting the Lexington, KY driveway gate with tree of life decoration.

 

Plasma cutting the tree design cut from steel 1/4" plate.

 

Plasma cutting a leaf on the metal art tree.

Plasma torch and plasma cut ornamental whimsical design.

Once the plasma cutter has finished its job the unwanted parts are picked out and scrapped. The completed part is sent to the fabrication table for cleanup and preparation for fabrication.

1/4" steel plate after it has been plasma cut into a tree of life iron gate design.

Then a ring is rolled from 2″ x 3/8″ flat bar that is wrapped around the metal tree.

Rolled flat bar and design of tree cut out of 1/4" plate steel.

The flat bar is drawn tight with a clamp against the plasma cut tree and tack welded in place.

Clamping the rolled flat bar to the tree design.

A couple dozen tack welds hold the ring tightly in place before the heat and pressures of the full and final MIG welding process are later applied.

Attaching the rolled 2" x 3/8" flat bar border to the plasma cut plate.

Once the tree has been wrapped in flat bar, the outer frame of the gate is put together.

Assembling the tree of life gate frame.

Framing up the tree of life entrance gate.

The corners of the frame are double checked for squareness. As they are tacked together and welded, the parts have a way of moving due to the heated metal shrinking as it cools.Assembling the components of the tree of life gate.

Once the outer frame is tacked together the wavy pickets are laid into place and marked out for cutting.

Assembling the pickets into the frame and artwork.

Assembling the pickets into the frame and artwork.

Rolled flat bar welded to ornamental tree and wavy pickets.

Once cut, the pickets are tacked into place where the marks were established earlier.

The pickets all get welded solid to the flat bar.Fabrication of tree of life driveway gate on welding table.

Then the outer frame is welded solid.

Rolled tubing pickets welded into the tree of life gate frame.

Wavy pickets being placed into decorative Lexington, KY gate.

Back side of welded steel tree of life gate.

The tree silhouette is welded solid everywhere it touches the flat bar.

The top frame welded solid where the tree/flat bar meets the gate frame.

Whimsical tree design plasma cut from steel.

Plasma cut steel tree of life design.

The gate is stood up & flipped over so the backside can be welded up.

Tree of life custom gate stood up beside the welding table.

1/4″ plate steel tree leaf cut with a Hypertherm 45XP plasma machine. Near laser quality with super clean cuts.

Plasma cut edge of steel art cut from 1/4" plate by JDR Metal Art.

Looking across from the end of the gate, both ends are doubled checked for plumb.

Once flipped, the backside of the gate is welded up; frame, pickets, flat bar and tree.

Now all the welds are completed and this gate is built. The customer will be installing the hinges and painting the gate.

 

 

 

 

 

Because nothing says NO TRESPASSING quite like two German Shepherds…on Iron Gates

Security Driveway Gates That Send a Statement

Iron gates really don’t have to be mundane.

They can have something to say about what is on the other side.




For 2019 (and beyond!), we look forward to continue helping people make an impact and stand out from the crowd.

Thanks to everyone who made us a part of their lives in 2018..a year with more repeat customers..the highest of compliments for us at JDR Metal Art!

Here are some more pics of the process…

Photo of German shepherd and butterfly emblem on ornamental gate.


Boat Driveway Gate Design – Chris Craft

Boat Driveway Gate Design by JDR Metal Art

Custom Chris Craft Theme

Here’s a cool boat themed driveway gate project currently being built. It’s a 14′ dual swing (approx. 7′ per panel) that will hang from posts in Pennsylvania.

Initial Design Drafts of Client’s Gate

A metal boat design for a driveway gate.

Driveway Gate Pictures

Pictures taken while fabricating the gate frame; preparing the channels for pickets which will be placed accordingly and welded completely solid for a seamless finish. The double curved arch takes a lot of precision layout to make perfect.

Custom boat themed metal driveway gates built by JDR Metal Art.

This particular entry gate is one of several other Pennsylvania driveway gate projects we’ve completed in the recent past. We’ve also done custom done horse themes with mare and foal

Have a Question for us? Get a Quote Today

Ex. 12' wide x 6' tall
Ex.: Farm, Ranch, Residential, Simple, Traditional, Wildlife, Pets, Equine, Trees, , etc.

California Driveway Gates | Custom Metal Art Horse Design

California Driveway Gates with Custom Horse Design by JDR Metal Art

23′ Dual Swing Gate with Double Arched Top

Here is another fantastic looking set of horse-themed California driveway gates custom designed, built and shipped directly to the clients by JDR Metal Art.

It’s always a satisfying experience to work with such great clients from start to finish!

We were able to create exactly the gate design they were looking for and they will be enjoying their new gates for many years to come.

In order to give each of our clients a lifetime of enjoyment each gate we build is handcrafted to the highest standards. Each stage, from design to metalwork to powder coat finish, is carried out under one roof by our small team of highly skilled and dedicated craftsmen.

Need to make an informed decision about your upcoming custom driveway gate project? Give our excellent customer service a try with a free consultation!

 

Take a minute to fill out the following form and we will be back in touch with your requested information within several hours!

Ex. 12' wide x 6' tall
Ex.: Farm, Ranch, Residential, Simple, Traditional, Wildlife, Pets, Equine, Trees, , etc.

Driveway Gates | Missouri Raccoon Deer & Tree Theme

Driveway Gates installed at Missouri Farm by JDR Metal Art

20′ Wide Dual Swing Driveway Gates with Custom Tree, Racoon, Whitetail Buck and Grass

Here is 20′ dual swing driveway gate design JDR Metal Art created for a coon hunter’s farm entrance near St. Louis, Missouri.

These gates include many plasma cut steel features including an ornamental tree with oak leaves. Each gate panel is arched from 5′ tall on the ends to 8′ tall in the center!

Creative tree themed driveway gates for Missouri entrance.

Custom Designed Plasma Cut Gate Panels

We create driveway gate designs for our customers. Our designs are crafted to appeal specifically to the customer’s life interests.

For this steel farm gate design we are working with a customer who is a well-known coon dog trainer and breeder. We tailored the metal gate design for him to depict plasma cut silhouettes of trees, deer, raccoons and grass that would complement his farm theme.

Ex. 12' wide x 6' tall
Ex.: Farm, Ranch, Residential, Simple, Traditional, Wildlife, Pets, Equine, Trees, , etc.